| MOQ: | 1 |
| Price: | Negotiable |
| Standard Packaging: | Cartons |
| Delivery Period: | 20 work days |
| Supply Capacity: | 10000pcs/month |
OWP-BL1500H-D3-1 — 1500W DC48V Canned Coolant Pump for Sub-4U In-Rack CDUs
Product Overview
The OWP-BL1500H-D3-1 is a centrifugal canned pump built for in-rack Coolant Distribution Units with a height budget under 4U (177.6 mm). Running on DC48V with a 36–58V input window and a 1500W rating, it circulates deionized water or antifreeze at 150 L/min against a 30 m head. The unit is fully sealed (IP67), communicates via RS485, and is designed for ≥20,000 hours of continuous duty inside rack-mounted cooling modules.
Specifications
| Group | Item | Value |
|---|---|---|
| Electrical | Rated voltage / range | DC48V (DC36–58V) |
| Rated power | 1500W | |
| Hydraulic | Flow at 30 m head | 150 L/min |
| System pressure | -0.75 ~ 10 Bar | |
| Acoustic | Noise at 1 m | ≤65 dB |
| Environmental | Ambient / fluid temperature | -40°C ~ 65°C |
| Altitude / humidity | ≤3000 m / 5–95% | |
| Construction | Wetted metals | 304 stainless steel |
| Connections | φ30 mm bore, φ64 mm tri-clamp | |
| Reliability / Interface | Service life / comms / ingress | ≥20,000 h / RS485 / IP67 |
Application
An in-rack CDU must fit beside IT hardware while moving enough coolant for the entire rack. Within a sub-4U envelope, every liter of internal volume matters. The pump's BLDC permanent-magnet motor keeps the drive compact, and 1500W draw stays within typical rack power allocations. RS485 lets the rack controller adjust speed as load changes, while ≤65 dB noise respects the acoustic limits of occupied server rooms.
Main Points & Industry Demands
Rack-level liquid cooling imposes a tight three-way constraint: heat flux per rack keeps rising, yet the CDU shares the rack's physical and electrical budget. Components must therefore combine high hydraulic output with small size and moderate power draw. Because in-rack units sit directly next to IT gear, leakage tolerance is effectively zero, and service events inside a live rack are costly. This pushes demand toward seal-less hydraulics, long wear life, and the ability to cold-start at the full ambient range of data hall operating conditions.
Product Advantages as Core Solutions
Operational Mechanism
Fluid enters through the φ30 mm tri-clamp port into the impeller eye. The BLDC motor spins the closed twisted impeller, and centrifugal action raises the fluid's kinetic energy; the volute converts this to pressure, sustaining 30 m of head. A stainless steel can separates rotor from stator, so the pumped medium itself cools and lubricates the bearings—no dynamic seal exists to wear out or leak.
Selection Guide
Using the common planning figure of 1.5 L/min per kW of heat load, the rated point of 150 L/min equates to roughly 100 kW of rack heat. Most single racks fall well below this, meaning one pump can serve a rack with substantial margin; two or more high-density racks may also share one unit where the loop allows. Confirm the margin against the actual pressure-drop curve of cold plates and manifolds before finalizing redundancy.
FAQ
Q1: What lead time should we plan for an in-rack CDU project?
A: Standard delivery is 20 working days; monthly capacity reaches 10,000 units.
Q2: Can the pump be adapted to our CDU's control architecture?
A: Customization is supported, with rapid-response technical support during integration.
Q3: What service life and warranty apply?
A: Working life exceeds 20,000 hours, and the standard warranty is two years.
| MOQ: | 1 |
| Price: | Negotiable |
| Standard Packaging: | Cartons |
| Delivery Period: | 20 work days |
| Supply Capacity: | 10000pcs/month |
OWP-BL1500H-D3-1 — 1500W DC48V Canned Coolant Pump for Sub-4U In-Rack CDUs
Product Overview
The OWP-BL1500H-D3-1 is a centrifugal canned pump built for in-rack Coolant Distribution Units with a height budget under 4U (177.6 mm). Running on DC48V with a 36–58V input window and a 1500W rating, it circulates deionized water or antifreeze at 150 L/min against a 30 m head. The unit is fully sealed (IP67), communicates via RS485, and is designed for ≥20,000 hours of continuous duty inside rack-mounted cooling modules.
Specifications
| Group | Item | Value |
|---|---|---|
| Electrical | Rated voltage / range | DC48V (DC36–58V) |
| Rated power | 1500W | |
| Hydraulic | Flow at 30 m head | 150 L/min |
| System pressure | -0.75 ~ 10 Bar | |
| Acoustic | Noise at 1 m | ≤65 dB |
| Environmental | Ambient / fluid temperature | -40°C ~ 65°C |
| Altitude / humidity | ≤3000 m / 5–95% | |
| Construction | Wetted metals | 304 stainless steel |
| Connections | φ30 mm bore, φ64 mm tri-clamp | |
| Reliability / Interface | Service life / comms / ingress | ≥20,000 h / RS485 / IP67 |
Application
An in-rack CDU must fit beside IT hardware while moving enough coolant for the entire rack. Within a sub-4U envelope, every liter of internal volume matters. The pump's BLDC permanent-magnet motor keeps the drive compact, and 1500W draw stays within typical rack power allocations. RS485 lets the rack controller adjust speed as load changes, while ≤65 dB noise respects the acoustic limits of occupied server rooms.
Main Points & Industry Demands
Rack-level liquid cooling imposes a tight three-way constraint: heat flux per rack keeps rising, yet the CDU shares the rack's physical and electrical budget. Components must therefore combine high hydraulic output with small size and moderate power draw. Because in-rack units sit directly next to IT gear, leakage tolerance is effectively zero, and service events inside a live rack are costly. This pushes demand toward seal-less hydraulics, long wear life, and the ability to cold-start at the full ambient range of data hall operating conditions.
Product Advantages as Core Solutions
Operational Mechanism
Fluid enters through the φ30 mm tri-clamp port into the impeller eye. The BLDC motor spins the closed twisted impeller, and centrifugal action raises the fluid's kinetic energy; the volute converts this to pressure, sustaining 30 m of head. A stainless steel can separates rotor from stator, so the pumped medium itself cools and lubricates the bearings—no dynamic seal exists to wear out or leak.
Selection Guide
Using the common planning figure of 1.5 L/min per kW of heat load, the rated point of 150 L/min equates to roughly 100 kW of rack heat. Most single racks fall well below this, meaning one pump can serve a rack with substantial margin; two or more high-density racks may also share one unit where the loop allows. Confirm the margin against the actual pressure-drop curve of cold plates and manifolds before finalizing redundancy.
FAQ
Q1: What lead time should we plan for an in-rack CDU project?
A: Standard delivery is 20 working days; monthly capacity reaches 10,000 units.
Q2: Can the pump be adapted to our CDU's control architecture?
A: Customization is supported, with rapid-response technical support during integration.
Q3: What service life and warranty apply?
A: Working life exceeds 20,000 hours, and the standard warranty is two years.