| MOQ: | 1 |
| Price: | Negotiable |
| Standard Packaging: | Cartons |
| Delivery Period: | 20 work days |
| Payment Method: | T/T |
| Supply Capacity: | 10000pcs/month |
OWP-BL1500H-D3-1 — 150 L/min at 30 m Head for In-Row CDU Circulation Duty
Product Overview
Positioned between facility water and IT loops, an in-row CDU needs a circulation pump that sustains high flow against real-world pressure loss. The OWP-BL1500H-D3-1 answers this with 150 L/min at 30 m head on a DC48V supply, in a seal-less canned centrifugal configuration. It handles deionized water or glycol mixtures, tolerates -0.75 to 10 Bar system pressure, and reports status over RS485 for continuous supervision.
Specifications
| Category | Parameter | Value |
|---|---|---|
| Power supply | Rated / operating voltage | DC48V / DC36–58V |
| Rated power | 1500W | |
| Hydraulic performance | Flow–head point | 150 L/min @ 30 m |
| Pressure envelope | -0.75 ~ 10 Bar | |
| Noise emission | At 1 m distance | ≤65 dB |
| Operating conditions | Temperature (air & fluid) | -40°C ~ 65°C |
| Humidity / altitude | 5–95% / ≤3000 m | |
| Wetted materials | Metal parts | 304 stainless steel |
| Fittings | Port bore / clamp | φ30 mm / φ64 mm tri-clamp |
| Reliability | Design life | ≥20,000 h |
| Control & protection | Interface / ingress rating | RS485 / IP67 |
Application
In-row CDUs serve one or more racks from a floor-standing position, so their internal pumps face the combined resistance of heat exchangers, manifolds, and hose runs. The 30 m head covers such multi-component loops, while the -0.75 Bar lower bound accommodates transient suction conditions during filling or low-tank operation. Tri-clamp φ64 mm connections simplify swapping during scheduled service, keeping row-level uptime high.
Main Points & Industry Demands
Row-level cooling concentrates flow for several racks, which raises both hydraulic resistance and the cost of downtime. Operators expect the CDU pump to run unattended for years, track its condition remotely, and avoid any coolant release near powered equipment. Energy use also matters at row scale: a pump that adds less heat and draws less power reduces the facility overhead assigned to cooling. The result is a requirement profile centered on durable hydraulics, seal-less integrity, and communication-driven visibility rather than raw size.
Product Advantages as Core Solutions
Operational Mechanism
The permanent-magnet synchronous motor rotates the impeller inside a sealed stainless steel chamber. Entering fluid is captured by the twisted impeller blades and flung outward, building pressure in the volute; the can wall isolates the rotor electrically while allowing full fluid contact for cooling and lubrication. Because there is no shaft seal, friction losses and leak paths are structurally removed.
Selection Guide
At the industry reference ratio of 1.5 L/min per kW, this unit's rated flow supports approximately 100 kW of dissipated heat—enough for a typical in-row CDU serving several standard racks, and adequate for many high-density rows with N+1 redundancy. Glycol loops and fine-pore filters add resistance, so verify that the operating point remains on the pump curve at the project's actual fluid mix and temperature.
FAQ
Q1: How is after-sales coverage arranged for fleet deployments?
A: The product is covered by a two-year warranty, and rapid-response technical support is provided.
Q2: What is the realistic in-service lifespan?
A: Working life exceeds 20,000 hours under rated conditions.
Q3: Can you handle volume orders for multi-row rollouts?
A: Yes—lead time is 20 working days at a monthly capacity of 10,000 units.
| MOQ: | 1 |
| Price: | Negotiable |
| Standard Packaging: | Cartons |
| Delivery Period: | 20 work days |
| Payment Method: | T/T |
| Supply Capacity: | 10000pcs/month |
OWP-BL1500H-D3-1 — 150 L/min at 30 m Head for In-Row CDU Circulation Duty
Product Overview
Positioned between facility water and IT loops, an in-row CDU needs a circulation pump that sustains high flow against real-world pressure loss. The OWP-BL1500H-D3-1 answers this with 150 L/min at 30 m head on a DC48V supply, in a seal-less canned centrifugal configuration. It handles deionized water or glycol mixtures, tolerates -0.75 to 10 Bar system pressure, and reports status over RS485 for continuous supervision.
Specifications
| Category | Parameter | Value |
|---|---|---|
| Power supply | Rated / operating voltage | DC48V / DC36–58V |
| Rated power | 1500W | |
| Hydraulic performance | Flow–head point | 150 L/min @ 30 m |
| Pressure envelope | -0.75 ~ 10 Bar | |
| Noise emission | At 1 m distance | ≤65 dB |
| Operating conditions | Temperature (air & fluid) | -40°C ~ 65°C |
| Humidity / altitude | 5–95% / ≤3000 m | |
| Wetted materials | Metal parts | 304 stainless steel |
| Fittings | Port bore / clamp | φ30 mm / φ64 mm tri-clamp |
| Reliability | Design life | ≥20,000 h |
| Control & protection | Interface / ingress rating | RS485 / IP67 |
Application
In-row CDUs serve one or more racks from a floor-standing position, so their internal pumps face the combined resistance of heat exchangers, manifolds, and hose runs. The 30 m head covers such multi-component loops, while the -0.75 Bar lower bound accommodates transient suction conditions during filling or low-tank operation. Tri-clamp φ64 mm connections simplify swapping during scheduled service, keeping row-level uptime high.
Main Points & Industry Demands
Row-level cooling concentrates flow for several racks, which raises both hydraulic resistance and the cost of downtime. Operators expect the CDU pump to run unattended for years, track its condition remotely, and avoid any coolant release near powered equipment. Energy use also matters at row scale: a pump that adds less heat and draws less power reduces the facility overhead assigned to cooling. The result is a requirement profile centered on durable hydraulics, seal-less integrity, and communication-driven visibility rather than raw size.
Product Advantages as Core Solutions
Operational Mechanism
The permanent-magnet synchronous motor rotates the impeller inside a sealed stainless steel chamber. Entering fluid is captured by the twisted impeller blades and flung outward, building pressure in the volute; the can wall isolates the rotor electrically while allowing full fluid contact for cooling and lubrication. Because there is no shaft seal, friction losses and leak paths are structurally removed.
Selection Guide
At the industry reference ratio of 1.5 L/min per kW, this unit's rated flow supports approximately 100 kW of dissipated heat—enough for a typical in-row CDU serving several standard racks, and adequate for many high-density rows with N+1 redundancy. Glycol loops and fine-pore filters add resistance, so verify that the operating point remains on the pump curve at the project's actual fluid mix and temperature.
FAQ
Q1: How is after-sales coverage arranged for fleet deployments?
A: The product is covered by a two-year warranty, and rapid-response technical support is provided.
Q2: What is the realistic in-service lifespan?
A: Working life exceeds 20,000 hours under rated conditions.
Q3: Can you handle volume orders for multi-row rollouts?
A: Yes—lead time is 20 working days at a monthly capacity of 10,000 units.