| MOQ: | 1 |
| Price: | Negotiable |
| Standard Packaging: | Cartons |
| Delivery Period: | 20 work days |
| Supply Capacity: | 10000pcs/month |
OWP-BL1500H-D3-1 — -40°C Cold-Capable Coolant Pump for Energy Storage Thermal Management
Product Overview
Battery energy storage systems expose cooling hardware to outdoor temperature swings, dust, and long idle-to-full-load cycles. The OWP-BL1500H-D3-1 circulates water or antifreeze at 150 L/min, 30 m head, and 1500W from DC48V, in an IP67-sealed canned centrifugal package rated from -40°C to 65°C. Its stainless steel fluid path tolerates glycol mixtures used for freeze protection in containerized ESS installations.
Specifications
| Segment | Parameter | Value |
|---|---|---|
| Drive | Rated voltage / power | DC48V (DC36–58V) / 1500W |
| Hydraulics | Rated flow & head | 150 L/min @ 30 m |
| Working pressure | -0.75~10 Bar | |
| Acoustics | Noise @ 1 m | ≤65 dB |
| Climate rating | Air & fluid temperature | -40°C ~ 65°C |
| Humidity / altitude | 5~95% / ≤3000 m | |
| Materials | Wetted metal | 304 stainless steel |
| Connections | Port / clamp | φ30 mm / φ64 mm tri-clamp |
| Service | Design life | ≥20,000 h |
| Electronics | Comms / ingress | RS485 / IP67 |
Application
In ESS containers, the pump feeds the battery coolant loop from a liquid cooling unit. Antifreeze compatibility covers low-temperature sites; the -40°C lower bound supports cold-climate commissioning and winter operation. The 10 Bar rating matches pressurized glycol loops, and tri-clamp connections allow fast field replacement during plant maintenance windows. IP67 sealing suits dusty or semi-outdoor container environments.
Main Points & Industry Demands
Storage plants value availability above almost everything: a thermal-management failure can force derating of megawatt-hour assets. Pumps must therefore survive thermal cycling, remain sealed against glycol loss over years, and start reliably after cold soak. Sites at altitude or in high-humidity regions add environmental stress. Combined with limited maintenance access in remote plants, these conditions favor seal-less hydraulics, wide temperature certification, and bearing systems that tolerate long unattended duty.
Product Advantages as Core Solutions
Operational Mechanism
The BLDC motor drives a closed twisted impeller within a sealed stainless chamber. Fluid entering the φ30 mm port gains tangential speed from the impeller; the volute converts velocity head into the 30 m pressure rise that pushes coolant through battery cold plates and plate heat exchangers. The pumped medium bathes the rotor and its wear pair, providing simultaneous cooling and lubrication with no external seal.
Selection Guide
Using 1.5 L/min per kW as a planning basis, the rated 150 L/min maps to roughly 100 kW of transferable heat—far above the needs of a single battery cluster, so one pump can serve multiple container strings or provide deep redundancy margin within one thermal unit. Battery loops typically carry modest heat per flow, so operating speed will usually sit below maximum; confirm loop resistance to position the duty point efficiently.
FAQ
Q1: How quickly can units be supplied for a utility-scale project?
A: Lead time is 20 working days, supported by a monthly production capacity of 10,000 units.
Q2: Is technical assistance available during plant commissioning?
A: Yes, rapid-response technical support is provided.
Q3: What long-term coverage do we get?
A: Two-year warranty and a working life of over 20,000 hours.
| MOQ: | 1 |
| Price: | Negotiable |
| Standard Packaging: | Cartons |
| Delivery Period: | 20 work days |
| Supply Capacity: | 10000pcs/month |
OWP-BL1500H-D3-1 — -40°C Cold-Capable Coolant Pump for Energy Storage Thermal Management
Product Overview
Battery energy storage systems expose cooling hardware to outdoor temperature swings, dust, and long idle-to-full-load cycles. The OWP-BL1500H-D3-1 circulates water or antifreeze at 150 L/min, 30 m head, and 1500W from DC48V, in an IP67-sealed canned centrifugal package rated from -40°C to 65°C. Its stainless steel fluid path tolerates glycol mixtures used for freeze protection in containerized ESS installations.
Specifications
| Segment | Parameter | Value |
|---|---|---|
| Drive | Rated voltage / power | DC48V (DC36–58V) / 1500W |
| Hydraulics | Rated flow & head | 150 L/min @ 30 m |
| Working pressure | -0.75~10 Bar | |
| Acoustics | Noise @ 1 m | ≤65 dB |
| Climate rating | Air & fluid temperature | -40°C ~ 65°C |
| Humidity / altitude | 5~95% / ≤3000 m | |
| Materials | Wetted metal | 304 stainless steel |
| Connections | Port / clamp | φ30 mm / φ64 mm tri-clamp |
| Service | Design life | ≥20,000 h |
| Electronics | Comms / ingress | RS485 / IP67 |
Application
In ESS containers, the pump feeds the battery coolant loop from a liquid cooling unit. Antifreeze compatibility covers low-temperature sites; the -40°C lower bound supports cold-climate commissioning and winter operation. The 10 Bar rating matches pressurized glycol loops, and tri-clamp connections allow fast field replacement during plant maintenance windows. IP67 sealing suits dusty or semi-outdoor container environments.
Main Points & Industry Demands
Storage plants value availability above almost everything: a thermal-management failure can force derating of megawatt-hour assets. Pumps must therefore survive thermal cycling, remain sealed against glycol loss over years, and start reliably after cold soak. Sites at altitude or in high-humidity regions add environmental stress. Combined with limited maintenance access in remote plants, these conditions favor seal-less hydraulics, wide temperature certification, and bearing systems that tolerate long unattended duty.
Product Advantages as Core Solutions
Operational Mechanism
The BLDC motor drives a closed twisted impeller within a sealed stainless chamber. Fluid entering the φ30 mm port gains tangential speed from the impeller; the volute converts velocity head into the 30 m pressure rise that pushes coolant through battery cold plates and plate heat exchangers. The pumped medium bathes the rotor and its wear pair, providing simultaneous cooling and lubrication with no external seal.
Selection Guide
Using 1.5 L/min per kW as a planning basis, the rated 150 L/min maps to roughly 100 kW of transferable heat—far above the needs of a single battery cluster, so one pump can serve multiple container strings or provide deep redundancy margin within one thermal unit. Battery loops typically carry modest heat per flow, so operating speed will usually sit below maximum; confirm loop resistance to position the duty point efficiently.
FAQ
Q1: How quickly can units be supplied for a utility-scale project?
A: Lead time is 20 working days, supported by a monthly production capacity of 10,000 units.
Q2: Is technical assistance available during plant commissioning?
A: Yes, rapid-response technical support is provided.
Q3: What long-term coverage do we get?
A: Two-year warranty and a working life of over 20,000 hours.