Name: JYQD-V8.8 high voltage 110VAC/22VAC input BLDC Motor Driver
Brand: JUYI
SKU: JYQD-V8.8
Price: 1.00 USD
Availability: InStock
Rating: 5 (185 reviews)

Home Products BLDC Driver Board

JYQD-V8.8 high voltage 110VAC/22VAC input BLDC Motor Driver

Product Details:

Brand Name:	JUYI
Model Number:	JYQD-V8.8

Payment & Shipping Terms:

Minimum Order Quantity:	1 set
Price:	Negotiable

Contact Now

Detailed Product Description

Workingvoltage:

110VAC/220VAC

Max Working Current:

0.5A

Application:

Sensorless Motor Driver Board

Operating Temp.:

-20—85℃

High Light:

JYQD V8.8

sensorless bldc motor controllers

sensorless brushless motor driver

Product Description

JYQD-V8.8 is very compact size BLDC motor driver board with necessary standard functions,its favorable price and reliable performance are competitive for industrial and commercial applications.
Its widely applied by the worldwide clients almost for 8 years,its mature and stable design are competent for many applications.

MODEL NO.	JYQD-V8.8
OPERATING TEMPERATURE	-20—85℃
INPUT VOLTAGE	90V-265VAC (For 155V-310VDC motor)
MAX WORKING CURRENT	0.5A
PWM SPEED REGULATION	PWM Frequency :1K-10KHz, 0-100% dutycycle
ANALOG VOLTAGE SPEED REGULATION	0-5V

Application guidelines

1: Confirm that the voltage and power paraparameters of the motor not exceed the range as specified.
2:This driver board is used for 3-phase brushless sensorless motor, but not suit for all 3-phase brushless sensorless motors directly. If the driving effect is not good (such as starting jitter, reversing, the motor noload working current is too large, the speed is not stable, the efficiency is low, and can’t start-up with load.) Customers can adjust the resistance and capacitance of the driver board according to the actual situation to achieve the best driving effect (contact us for guidance)

JYQD-V8.8 is driver board without housing and heatsink, it can drive the BLDC motor below 100W without any heatsink,but needs normal ventilation.

The "5V" pin on the driver board is forbidden to connect with external power equipment.it is only suit for external potentiometer or switch for speed adjustment,reversing and singnal swtiching operation.

Description of wiring

1. Control port
5V — Driver board internal output voltage, for external potentiometer or switch for speed adjustment and reversing operation 
Z/F —Rotating direction control ports. Connect “5V” high level or no connect is Forward direction, connect 0V low level or connect to GND is reverse direction. 
VR —Speed control port. Analog voltage linear speed regulation 0.1V -5V, The input resistance is 20K Ohm ,connect with GND when input PWM speed regulation, PWM frequency:1K-10KHz; Duty cycle 0-100% 
M—Speed pulse signal output 
GND—Used for Driver board internal control 
2. Power port
MA ----motor phase A 
MB ---- motor phase B 
MC---- motor phase C 
AC ----L
AC----N
3:Remarks
1. Use shielded wires if the drivers board has more than 50 cm distance from the motor, otherwise it may lead to abnormal driving, affecting the normal use. 
2. Control port distance: 2.54mm,Power port distance:3.96 mm
3. Pay attention to the insulation between the driver MOSFET and the heatsink or the installation plate.
 

Overall dimensions

Board size customizable to your requests.

Please contact us if you need technical support.
OEM,ODM service are available!

Tag:

brushless motor driver,

bldc motor driver,

JYQD V8.8

Contact Details

Changzhou Bextreme Shell Motor Technology Co.,Ltd

Contact Person: Amigo Deng

Tel: +8618994777701