|
Product Details:
|
| Working Voltage: | 24VDC | Working Current: | 15A |
|---|---|---|---|
| PWM Speed Control: | Duty Cycle 0-100% | Speed Pulse Signal Output: | YES |
| Hall Effect: | Yes | Brushless: | Yes |
| High Light: | 12v to 36v 500w bldc motor controller,12v to 36v bldc motor driver design,500w bldc motor controllers |
||
ATTENTION:
1: This brushless DC motor driver board is widely apply to DC Brushless with Hall sensor (120°angle) three-wire motors
2: please make sure to add heat sink when the output power more than 60W.
When installing the heat sink, please add insulation layer for 6pcs MOS. It will damage the driver board permanently without insulation,and also apply Heat-Conducting Silicone Grease on the insulation for better cooling.
3: As the BLDC motor factory may use different Hall sequence,if the motor start abnormal, can't start or the current getting to high, please adjust the sequence of the Hall, or the driver will be damaged.
4: Please offer the right voltage to the driver, do not exceed the operating range. and the driver has built-in 5V for speed control, DO NOT connect extra power supply( 5V ) into the driver for speed controlling, it will damage the driver.
Specifications
| Operating Voltage | DC 12V-36V |
| Operating current | ≤15A |
| Output power | ≤500W |
| Speed control | 0.1V-5V or PWM input |
| Operating temperature | -40-85℃ |
| Operating humidity | ≤90% |
| Protection | Overload protection, locked-rotor protection, over-current protection |
| Functions | Speed pulse signal output, soft reversing (485,CAN port optional) |
| Overall dimension | 63X42.5X17mm (L*W*H) |
| Net weight | 55 g |
| Optional component |
Speed regulating potentiometer external 5 digit tachometer |
Wiring instructions
Mounting dimension
Contact Person: Mr. Amigo Deng
Tel: +86-18994777701
Fax: 86-519-83606689
