|
Product Details:
|
| Operate Voltage: | 12V-36V | L.V Protection: | Support |
|---|---|---|---|
| Continuous Operating Current: | 15A | Max Current: | 16A |
| Operating Temperature: | -20-85℃ | Hall Sensor: | Yes |
| Product Name: | BLDC Motor Driver Board With Hall Sensor For Hub Motor | O.v Protection: | Support |
| Color: | Green | ||
| High Light: | 36V BLDC Motor Driver Board,Hall Sensor Motor Driver Board,PWM Control BLDC Driver Board |
||
JYQD-V7.5E 36V-72V BLDC Motor Driver Board Hall Senosr PWM Speed Control For Hub Motor Electric Skateboard ...Its widely applied by the worldwide clients almost for 8 years,its mature and stable design are competent for many applications.JYQD-V7.5E is very compact size BLDC motor driver board with necessary standard functions,its favorable price and reliable performance are competitive for industrial and commercial applications.
|
MODEL |
OPERATING TEMPERATURE (℃) |
OPERATING VOLTAGE (V) |
MAX CURRENT (A) |
CONTINUOUS OPERATING CURRENT (A) |
PWM SPEED REGULATION (1-20KHZ) |
ANALOG VOLTAGE SPEED REGULATION (V) |
Speed pulse signal output |
|
JYQD-V7.5E |
-20—85℃ |
36V-72V |
16A |
15A |
Duty cycle 0-100% |
0-5V |
√ |
1.Control port
5V — Driver board internal output voltage, external potentiometer or switch for speed adjustment and reversing operation
Z/F —Rotating direction control ports. Connect “5V” high level or no connect is Forward direction, connect 0 V low level or connect to GND is reverse direction.
VR —Speed control port. Analog voltage linear speed regulation 0.1v -5V, The input resistance is 20K Ohm ,connect with GND when input PWM speed regulation, PWM frequency:1-20KHZ; Duty cycle 0-100%
EL —Enable port control. Connect 5V or no connect to allow operation, connect GND to forbid operation.
Signal— Speed pulse signal output
GND—Used for Driver board internal control
2.Power port
MA ----motor phase A
MB ---- motor phase B
MC---- motor phase C
GND----DC-
VCC----DC +
3.Hall sensor port
Ha--- Hall a
Hb---Hall b
Hc---Hall c
GND---GND
5V---5V output
3.Use shielded wires if the drivers board has more than 50 cm distance from the motor, otherwise it may lead to abnormal driving, affecting the normal use.
4.Control port distance: 2.54mm,Power port distance:3.96 mm
5.Pay attention to the insulation between the driver MOSFET and the heatsink or the installation plate.
1.Applicable to hall brushless dc motor with Hall at 120°, not all manufacturers' Hall line sequence are corresponding, you can adjust the Hall line sequence or motor three-phase line sequence according to the actual situation, to achieve the best driving effect.
2.JYQD-V7.5E is driver board without housing and heatsink, it can drive the motor below 100 watt without any heatsink, but needs normal ventilation.
3.The 5V output port on the drive board is forbidden to connect external power equipment. It is only applicable to external potentiometer or switch for speed adjustment, commutation and enabling operation
4.Confirm that the voltage and power parameters of the motor not exceed the range as specified.
1.Q:Can I place a sample order?
Yes, we welcome sample order to test and check quality. Mixed samples are acceptable
2.What about the lead time
It is spending 30 days generally after you making the payment.
3.Do you provide technology support?
YES. Our company have strong R&D capability, we can provide technology support if you need.
5. How to ship to us?
We will ship the goods to you according to the DHL or UPS or FEDEX etc
6. How can I know the product is suitable for me?
Frist, you need to provide us the more details information about the product. We will recommend the item to you according to your requirement of specification. After you confirm, we will prepare the samples to you. also we will offer some good advances according to your product use.
Contact Person: Mr. Amigo Deng
Tel: +86-18994777701
Fax: 86-519-83606689
